Toll Grinding Newsgroup

Location: BULGARIA, SOFIA SOFIA

Granulator PET design 800/1200 132 kW.
Hydraulic unit for removing of the hopper - Full protection at operation - Total stop before various accesses to the machine - Full automated control - Very strong frame - Strengthened design of the rotor and the cutting chamber - Easy change of the screen - Hydraulic unit suitable for the opening of the screen cradle (for Kompass 800/1200 and the Kompass 800/1600) - Preventive Clutch between the shaft and the pulley for the rubber belts from the motor drive - Coated with Zinc before the painting - Low level of the noise - Very low rate of the dust - Prolong term for a life of the knives before the changing for sharpening - Adjustable knives - A jig where the rotor knives can be pre-set outside of the machine so that you can change them quickly without adjusting them in the machine. Knive’s steel - X153CrMoV12 = D2 = 1.2379 Bearings - SKF or FAG Rubber belts for the motor drive - made in Germany Motors (Delivered from Italy or Germany) - from 4 kW up to 160 kW / 1'500 rpm or 1'800 rpm / 3 phases / (60 Hz or 50 Hz) 480/460/400 V / IP54 or IP55 / Thermal Protection The motor controls (Star-Delta) are manufactured with units from ''Square D'' - the US or ''Telemechanique''- France. We can supply the machine and with Soft-Start for the motor.